Preparing To Set Up The Scanner On An Ethernet Network - Lexmark 6500e User Manual

Additional printer setup
2
Add the device:
a
For IP printing:
In Mac OS X version 10.5 or later
1
From the Apple menu, navigate to either of the following:
•
System Preferences > Print & Scan
•
System Preferences > Print & Fax
2
Click +.
3
If necessary, click Add Printer or Scanner or Add Other Printer or Scanner.
4
Click the IP tab.
5
Type the IP address of the scanner in the address field, and then click Add.
In Mac OS X version 10.4 or earlier
1
From the Finder, navigate to:
Applications > Utilities
2
Double‑click Printer Setup Utility or Print Center.
3
From the Printer List, choose Add, and then click IP Printer.
4
Type the IP address of the scanner in the address field, and then click Add.
b
For AppleTalk printing:
Notes:
•
Make sure AppleTalk is activated on your scanner.
• This feature is supported only in Mac OS X version 10.5 or earlier.
In Mac OS X version 10.5
1
From the Apple menu, navigate to:
System Preferences > Print & Fax
2
Click +, and then navigate to:
AppleTalk > select the device from the list > Add
In Mac OS X version 10.4 or earlier
1
From the Finder, navigate to:
Applications > Utilities
2
Double‑click Printer Setup Utility or Print Center.
3
From the printer list, click Add.
4
Click Default Browser tab > More Printers.
5
From the first pop‑up menu, select AppleTalk.
6
From the second pop‑up menu, select Local AppleTalk Zone.
7
Select the device from the list, and then click Add.

Preparing to set up the scanner on an Ethernet network

Note: If your network automatically assigns IP addresses to computers and other devices, continue on to installing
the scanner.
54