Lexmark 6500e User Manual page 196

Understanding printer menus
Menu item
ADF Skew Fix
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Enable Color Fax Scans
Off by default
On by default
Never use
Always use
Auto Convert Color Faxes to Mono
Faxes
On
Off
Fax Receive Settings
Menu item
Enable Fax Receive
On
Off
Fax Job Waiting
None
Toner
Toner and Supplies
Note: This menu appears only when
a supported scanner hard disk is
installed.
Rings to Answer
1–25
Auto Reduction
On
Off
Description
Corrects slight skew in the scanned image
Notes:
•
Off is the factory default setting.
•
On allows the printer to automatically fix skewed ADF files.
Specifies if the original document is scanned edge-to‑edge prior to faxing
Note: Off is the factory default setting.
Adjusts the sharpness of a fax
Note: 3 is the factory default setting.
Enables the user to specify warm or cool outputs. "Cool" values generate a bluer
output than the default while "warm" values generate a redder output than the
default.
Enables color faxing
Note: "Off by default" is the factory default setting.
Converts all outgoing faxes to black and white
Note: On is the factory default setting.
Description
Allows the printer to receive fax jobs
Note: On is the factory default setting.
Allows the printer to remove queued jobs that request specific unavailable resources
and store them in another queue.
Note: None is the factory default setting.
Specifies the number of rings before answering an incoming fax job
Note: 3 is the factory default setting.
Scales an incoming fax job so that it fits the size of the paper loaded in the designated
fax source
Note: On is the factory default setting.
196