Additional printer setup
Notes:
•
View the scanner IP address on the scanner control panel. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Open the printers folder.
In Windows 8
From the Search charm, type run and then navigate to:
Apps list > Run > type control printers > OK
In Windows 7 or earlier
a
Click
or click Start, and then click Run.
b
In the Start Search or Run dialog, type control printers.
c
Press Enter or click OK.
3
To select the device that has changed, do either of the following:
•
Press and hold the scanner, and then select Printer properties.
•
Right‑click the scanner, and then select Printer properties (Windows 7 or later) or Properties (earlier versions).
Note: If there is more than one copy of the scanner, then update all of them with the new IP address.
4
Click the Ports tab.
5
Select the port from the list, and then click Configure Port.
6
Type the new IP address in the Printer Name or IP Address field.
7
Click OK > Close.
For Macintosh users
1
Open a Web browser, and then type the scanner IP address in the address field.
Notes:
•
View the scanner IP address on the scanner control panel. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Add the scanner.
•
For IP printing:
In Mac OS X version 10.5 or later
a
From the Apple menu, navigate to either of the following:
–
System Preferences > Print & Scan
–
System Preferences > Print & Fax
b
Click +.
c
If necessary, click Add Printer or Scanner or Add Other Printer or Scanner.
d
Click the IP tab.
e
Type the scanner IP address in the address field, and then click Add.
58