Setting Up Remote Operator Panel - Lexmark XM7200 Series User Manual

Setting up and using the home screen applications
Use To
Scan a document and send it to a shared network folder. You can define up to 30 unique folder
destinations.
Notes:
•
•
1
Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
2
Do either of the following:
•
Click Set up Scan to Network > Click here.
•
Click Settings > Apps > Apps Management > Scan to Network.
3
Specify the destinations, and then customize the settings.
Notes:
•
See the mouse-over help beside some of the fields for a description of the setting.
•
To make sure the location settings of the destination are correct, type the correct IP address of the
host computer where the specified destination is located. For more information on obtaining the IP
address of the host computer, see
•
Make sure the printer has access rights to the folder where the specified destination is located.
4
Click Apply.
To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on
the printer display.

Setting up Remote Operator Panel

This application enables you to interact with the printer control panel even when you are not physically near
the network printer. From your computer, you can view the printer status, release held print jobs, create
bookmarks, and do other print-related tasks.
1
Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
2
Click Settings > Remote Operator Panel Settings.
3
Select the Enable check box, and then customize the settings.
4
Click Submit.
To use the application, click Remote Operator Panel > Launch VNC Applet.
The printer must have permission to write to the destinations. From the computer where
the destination is specified, use sharing, security, and firewall settings to allow the printer
at least a write access. For help, see the documentation that came with your operating
system.
The Scan to Network icon appears only when one or more destinations are defined.
"Finding the IP address of the computer" on page
25
20.