Setting Up Remote Operator Panel - Lexmark MX6500 User Manual

Setting up and using the home screen applications
3
To export or import a configuration for multiple applications, do the following:
a
Click Settings > Import/Export.
b
Do either of the following:
•
To export a configuration file, click Export Embedded Solutions Settings File, and then follow the instructions
on the computer screen to save the configuration file.
• To import a configuration file, do the following:
1
Click Import Embedded Solutions Settings File > Choose File, and then browse to the saved configuration
file that was exported from a previously configured device.
2
Click Submit.

Setting up Remote Operator Panel

This application shows the scanner control panel on your computer screen and lets you interact with the scanner control
panel, even when you are not physically near the network scanner. From your computer screen, you can view the
scanner status, release held print jobs, create bookmarks, and do other print-related tasks you might normally do while
standing at the network scanner.
1
Open a Web browser, and then type the scanner IP address in the address field.
Note: View the scanner IP address on the scanner home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2
Click Settings > Remote Operator Panel Settings.
3
Select the Enabled check box, and then customize the settings.
4
Click Submit.
To use the application, click Remote Operator Panel > Launch VNC Applet.
28