Paper Position Not Suitable For Borderless Printing; Roll Feed Unit Error; The Roll Feed Unit Is Loose; Stacker Not Ready - Canon iPF850 series Basic Manual

iPF850 Series
Cause
The print job received specifies
a type or width of paper that is
not compatible with borderless
printing.
The loaded paper is a size not
compatible with borderless print-
ing.
Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the suppor-
ted width for borderless printing.

Paper position not suitable for borderless printing.

Paper position not suitable for borderless printing.
Cause
Because paper expands or
contracts depending on the
environment of use, it may be-
come narrower or wider than
the supported width for bor-
derless printing.
The paper is loaded askew.

Roll feed unit error.

Roll feed unit error.
Cause
There is a problem with the
Roll Unit.

The roll feed unit is loose.

The roll feed unit is loose.
Cause
The Roll Unit is detached from the printer.

Stacker not ready.

Stacker not ready.
Cause
The Stacker is not ready.
Basic Guide
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2.
Replace the paper with paper compatible for borderless printing.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the Paper Ref-
erence Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.
The document will be printed with a border.
Use each type of paper only where the recommended environmental conditions are met. For de-
tails on environmental conditions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Use each type of paper only where the recommended environmental conditions are met. For de-
tails on environmental conditions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.")
Press ▲ or ▼ to select Change Paper and straighten the paper so that the edges are between
the ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
(See "Attaching the Roll Holder to Rolls.")
Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The
document will be printed with a border.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Turn off the printer and wait at least three seconds before restoring the power. If the message is dis-
played again, contact your Canon dealer for assistance.
Corrective Action
Push the Roll Unit firmly all the way in.
When printing using the Stacker, check the following.
Paper position not suitable for borderless printing.
Corrective Action
User's Guide
➔
P.21
➔
User's Guide
➔
P.12
➔
P.15
➔
User's Guide
➔
User's Guide
➔
Corrective Action
User's Guide
➔
P.12
➔
Corrective Action
Corrective Action
149