Warnings - Canon imagePROGRAF iPF6450 User Manual

Warnings (Windows)
3
Load the custom paper into the printer and click the Ex-
ecute button in Create Calibration Target.
4
Once the calibration target is registered in the printer,
click the Next button in the Execute create calibration
target dialog box.
5
The Confirm Update dialog box is displayed.
Confirm the update and click the Execute button.
•
Note

Warnings

Warnings

Take note of the following warnings when added custom paper other than Canon genuine paper and feed confirmed
paper to the printer driver and the printer itself.
About the Cutter
• Depending on the paper, there are types that cannot be cut by the cutter unit, and types that speed deterioration of
the blade and cause damage to the cutter. For thick paper, hard paper, etc. do not use the cutter unit, and instead
cut the roll paper using scissors, etc. after printing. In this case, select User Cut as the Automatic Cutting Set-
602
tings in the Roll Paper Settings dialog box.
If creating the calibration target fails, Target not registered is displayed in Color Calibration in the Add and Edit
Custom Paper dialog box. If creating the calibration target fails, it might be able to be created by changing the envi-
ronment where the printer is located.
iPF6450
User's Guide