Canon imagePROGRAF iPF6450 User Manual page 935

iPF6450
10
Push the Printhead Fixer Lever toward the back of the
printer until it clicks.
11
Close the Top Cover.
Ink now fills the system. It takes about 11 minutes for ink to
fill the system.
•
Never remove an Ink Tank while the system is filling with ink.
Important
•
The procedure is now finished if you have set Rep.P.head Print to Off in the Control Panel menu.
In this case, execute the Initial adjustmt of Head Posi. Adj. from the Control Panel menu.
Note
(See "Adjustment When Installing the Printhead.")
12
Follow the instructions on the Display Screen to advance the paper.
After the paper is advanced the Initial adjustmt of Head Posi. Adj. will be executed automatically.
•
When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing paper, set the optimal
Printhead height before aligning the printhead.
Note
(See "Enhancing Printing Quality.")
User's Guide
→P.800
→P.794
Replacing the Printhead
935