Removing Rolls From The Roll Holder - Canon imagePROGRAF iPF6450 User Manual

Removing Rolls From the Roll Holder

•
Note
7
Holding the Roll Holder flange (a), remove the holder from
the Roll Holder Slot.
•
Note
8
Close the Roll Feed Unit Cover.
•
To load new paper in the printer at this point, see "Loading Rolls in the Printer."
Note

Removing Rolls From the Roll Holder

Removing Rolls From the Roll Holder
1
Remove the Holder Stopper from the Roll Holder.
542
If it is difficult to perform operations from the front of the printer, perform operations from the back of the printer.
If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it easier to perform operations
from the front of the printer. (See "Lowering the Up-down Unit of the Spectrophotometer Unit (option) Manually.")
→P.555
For instructions on removing rolls from the Roll Holder, see "Removing Rolls From the Roll Holder."
→P.542
→P.536
iPF6450
User's Guide