Canon imagePROGRAF iPF6450 User Manual page 832

Using the Spectrophotometer Unit (option)
1
Load paper in the printer.
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select
press OK.
3
Press ▲ or ▼ to select Adjust Printer, and then press the OK button.
4
Press ▲ or ▼ to select Calibration, and then press the OK button.
5
Press ▲ or ▼ to select AutoAdjst(HiPrc) and then press OK to execute color calibration.
The system then prints the test pattern built into the printer, performs color measurement, and automatically
sets the adjustment value.
•
For details, see "Color Calibration Using the Spectrophotometer Unit (option)."
Note
Executing Color Calibration from the Computer
With the Color Calibration Management Console, you can execute color calibration from the computer via the same
process outlined above.
832
For details, refer to the Color Calibration Management Console instructions.
(See "Executing Color Calibration (Windows).")
(See "Executing Color Calibration (Mac OS X).")
→P.863
→P.899
(Settings/Adj. tab) and then
→P.833
iPF6450
User's Guide