Canon imagePROGRAF iPF6450 User Manual page 431

iPF6450
•
You can select only after Driver Matching Mode has been selected in Matching Mode.
Note
• Gamma
You can adjust the gradation of intermediate tones in an image. 2.2 is normally selected. If you want a softer im-
pression than 2.2, select 1.8.
•
You can select only after Driver Matching Mode has been selected in Matching Mode.
Note
• Input Profile
Select the input profile.
•
You can select only after ICC Matching Mode has been selected in Matching Mode.
Note
• Printer Profile
Select the printer profile.
•
You can select only after ICC Matching Mode has been selected in Matching Mode.
Note
• Soft Proof
When you place a checkmark here, ColorSync applies to the layout area.
•
You can select only after ColorSync has been selected in Matching Mode.
Note
User's Guide
Matching (Mac OS X)
431