Before Borderless Printing, Move The Blue Platen Switch; Blue Platen Switch Is Dirty; Move The Blue Platen Switch No.xx To The Right. (Xx Represents A Number); Cannot Adjust Paper Feed - Canon imagePROGRAF iPF6450 User Manual

iPF6450
•
If the printer is loaded with a type of paper on which color calibration can be executed, but there is no record of
having executed color calibration on that paper or a record of having executed Common calibration other any
other type of paper.
•
If the printer is loaded with a type of paper on which color calibration can be executed, there is a record of
having executed color calibration on that paper, and the predefined conditions since executing the color calibra-
tion the last time have been reached.
•
The Spectrophotometer Unit (optional) is installed. Although a media type that color calibration can be executed
on using the Spectrophotometer Unit is loaded in the printer and the result of a color check on that media excee-
ded the threshold value, the color calibration has not been performed.
(See "Paper that can be used in Color Calibration.")
(See "Color Checks Using the Spectrophotometer Unit (option).")

Before borderless printing, move the blue platen switch.

Before borderless printing, move the blue platen switch.
The blue Switch on the platen was set to the side opposite ● when
a borderless print job was received.

Blue platen switch is dirty.

Blue platen switch is dirty.
Cause
The blue Switch on the platen is dirty.

Move the blue platen switch No.xx to the right. (xx represents a number)

Move the blue platen switch No.xx to the right. (xx represents a number)
The printer has detected that the blue Switch on the platen needed in main-
tenance during printing is set away from the ● mark.

Cannot adjust paper feed.

Cannot adjust paper feed.
Cause
The Printhead nozzles are clogged.
Highly transparent film is loaded that cannot be used for
automatic feed amount adjustment.

Check printed document.

Check printed document.
Cause
The Printhead nozzles are becoming clogged.
User's Guide
Cause
→P.839
Cause
Corrective Action
Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.")
Cause
Execute Adj. Quality again, as follows.
1.
2.
3.
4.
Press the OK button to clear the error, and then adjust the feed amount manually.
(See "Manual Banding Adjustment.")
Corrective Action
If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.")
Before borderless printing, move the blue platen switch.
→P.835
Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.")
→P.944
Set blue platen Switch of the indicated number toward the ● side.
(See "Setting the Blue Switch on the Platen.")
Corrective Action
Press the OK button to clear the error.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.")
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.")
→P.928
Execute Adj. Quality again.
(See "Automatic Banding Adjustment.")
→P.928
Corrective Action
(See "Color Calibration
Using the Spectrophotom-
eter Unit (option).")
→P.833
Set Set Exec. Guide to
Off on the Control Panel
menu.
(See "Menu Structure.")
→P.657
Corrective Action
→P.992
Corrective Action
→P.992
→P.927
→P.804
→P.805
1023