Canon imagePROGRAF iPF6450 User Manual page 671

iPF6450
System Keep Paper Size
Setup
TrimEdge Reload
Rep.P.head Print
Nozzle Check
Use RemoteUI
Reset PaprSetngs
Erase High Speed
HDD Da-
ta
Secure High Spd.
Secure
Output Print
Method
Print (Auto Del)
Save: Box XX
Print After Recv
User's Guide
Setting Item Description, Instructions
Choose Off to give priority to margin settings. The larger value
is used if the margin specified in the printer driver does not
match the margin in the printer menu.
Specify whether to trim the leading edge of the currently retrac-
ted roll when the roll is advanced. Cut the edge if you are con-
cerned about any marks left on the roll when the roll is left in
the retracted position.
Specify On to have rolls cut when printing begins after Sleep
mode or when the power is restored. Selecting Automatic will
trim the edge when the roll has been in the retracted position
for two days or more.
Choose On to have the printer automatically execute the Ad-
vanced Adj. operations after you replace the Printhead. (See
"Automatic Adjustment to Straighten Lines and Colors.")
→P.796
In Frequency, specify the timing for automatic checks of noz-
zle clogging. Choose Standard to have the printer adjust the
timing for checks based on the frequency of nozzle use.
Choose 1 page to check once per page.
Select Warning > On to display warnings if the nozzles clog
during printing.
Choosing Off prohibits access from RemoteUI. Settings can
only be configured from the control panel.
Restores settings that you have changed with Media Configu-
ration Tool to the default values.
Erases file management data for print job data stored on the
printer's hard disk. (See "Erasing Data on the Printer's Hard
Disk.")
→P.689
Overwrites the entire hard disk with random data. (See "Eras-
ing Data on the Printer's Hard Disk.")
Overwrites the entire hard disk with 00, FF, and random data
(one time each). Verification is performed to check if the data
was correctly written. (See "Erasing Data on the Printer's Hard
Disk.")
→P.689
Select the printing method for jobs received from software oth-
er than the printer driver. When using the printer driver, config-
ure settings on the printer.
To print as usual, select Print. Selecting Print (Auto Del) will
print the job and then delete the data from the printer's hard
disk. Selecting Save: Box 01 will only save the print job in the
box, without printing it.
A setting for jobs received from software other than the printer
driver. When using the printer driver, configure settings on the
printer. Select On to print the job after it has been saved.
Menu Settings
→P.689
671