Print Area - Canon imagePROGRAF iPF6450 User Manual

Print Area

Minimum paper length
Maximum printable
length ( *1 )
Thickness
Roll maximum outer diameter
Supported paper core inner diameter
Print area
*1: Varies depending on the operating system or application.
Print Area
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless
printing, the actual printing area corresponds to the paper size minus the space for this margin.
Sheets Top Paper
Feed Slot
Front Paper
Feed Slot
Rolls
Sheets
• Printable Area
Printing from the Top Paper Feed Slot requires a margin of 3 mm (0.12 in) on top, 3 mm (0.12 in) or 23 mm (0.91
in) on bottom, and 3 mm (0.12 in) on the left and right sides. Some types of paper require a bottom margin of 23
mm (0.91 in). For more information, see the Paper Reference Guide. (See "Types of Paper.")
Printing from the Front Paper Feed Slot requires a margin of 3 mm (0.12 in) on top, 23 mm (0.91 in) on bottom,
and 3 mm (0.12 in) on the left and right sides.
• Recommended Print Area
A margin of 20 mm (0.79 in) on top, 23 mm (0.91 in) on bottom, and 5 mm (0.20 in) on left and right sides is re-
1036
quired.
Sheets (When the Spectrophotometer Unit is
mounted)
Rolls
Sheets Top Paper Feed Slot
Front Paper Feed Slot
Rolls
Sheets Top Paper Feed Slot
Front Paper Feed Slot
For details, see "Print Area."
→P.1036
Printable Area
Top Edge Bottom Edge
3 mm (0.12 in) 3 or 23 mm (0.12 or
0.91 in)
3 mm (0.12 in) 23 mm (0.91 in)
0 or 3 mm (0 or 0 or 3 mm (0 or 0.12
0.12 in) in)
420 mm (16.5 in)
18 m (19.7 yd)
1,600 mm (63.0 in)
914 mm (36.0 in)
0.07–0.8 mm (0.0028–0.031 in)
0.07–0.8 mm (0.0028–0.031 in)
0.5–1.5 mm (0.020–0.059 in)
150 mm (6 in) or shorter
2 inches / 3 inches
Sides Top Edge
3 mm (0.12 in) 20 mm (0.79 in)
3 mm (0.12 in)
0 or 3 mm (0 or 20 mm (0.79 in)
0.12 in)
iPF6450
Recommended Print Area
Bottom Edge Sides
23 mm (0.91 in) 5 mm (0.20 in)
5 mm (0.20 in) 5 mm (0.20 in)
→P.526
User's Guide