iPF6450
•
Do not move the Carriage over jammed paper. This may damage the Printhead.
Do not touch the Linear Scale (a) or Carriage Shaft (b).
•
Important
This may stain your hands and damage the printer.
•
If paper from a roll is jammed by the Paper Feed Slot
1.
Open the Roll Feed Unit Cover.
2.
Remove the jammed paper from the Paper
Feed Slot.
After removing the paper, make sure there are
no other scraps of paper in the printer.
If paper is jammed deep in the Paper Feed
Slot, remove the roll feed unit, and then clear
the paper jam. (See "Clearing Jammed Paper
(Paper Feed Slot).")
Note
User's Guide
→User's Guide (HTML)
→P.976
•
If it is difficult to perform operations from the front of the printer, perform operations from the back of the
printer.
If the printer has a Spectrophotometer Unit (option), lowering the Up-down Unit makes it easier to perform
operations from the front of the printer. (See "Lowering the Up-down Unit of the Spectrophotometer Unit
(option) Manually.")
→P.555
Clearing Jammed Roll Paper
979
Need help?
Do you have a question about the imagePROGRAF iPF6450 and is the answer not in the manual?
Questions and answers