Canon imagePROGRAF iPF6450 User Manual page 875

iPF6450
3
Enter the color check threshold value in ΔE and click the
OK button.
Getting the Printer Ready
1
Confirm whether the paper to be loaded can be used for color checks.
Paper for color check is paper that can be used with the Auto Adjust (High Precision) setting on the spectro-
photometer unit.
(See "Paper that can be used in Color Calibration.")
2
Load the paper.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
•
If Adj. Quality has not been executed even once on the paper you are using, execute Adj. Quality in the control
panel menu.
Note
(See "Automatic Banding Adjustment.")
3
Select the White/Black Backing Plate color.
(See "Switching the White/Black Backing Plate (Optional) Color.")
•
For the color of the White/Black Backing Plate, select the color from when color calibration was executed using the
spectrophotometer unit.
Note
(See "Executing Color Calibration.")
Executing Color Check
1
Open the Color Measurement sheet.
User's Guide
→P.839
→P.533
→P.536
→P.804
→P.863
Executing Color Check (Windows)
→P.837
875