Executing Color Check - Canon imagePROGRAF iPF6450 User Manual

Executing Color Check (Mac OS X)
The color chart is printed and color measurement be-
gins.
•
Note
11
Click the OK button.
Once the color measurement has finished, the color
measurement data is saved on the computer.

Executing Color Check

Executing Color Check
When a color check is executed, a built-in pattern is printed, the color difference from a calibration target registered in
the printer is calculated, and the check results are displayed.
•
This step can be executed when a printer that has a spectrophotometer unit installed is selected.
•
Note When printing the color check adjustment pattern, the calibration adjustment values are applied even if Use Adj. Value is set
to Disabled in the Control Panel menu.
(See "Color Calibration Using the Spectrophotometer Unit (option).")
Setting the Color Check Threshold Value
1
Double-click the printer you want to execute the color
check on in the Printer list.
908
You can exit the acquire color measurement data operation in the middle by clicking the Cancel button. However, it
may take some time to end.
→P.833
iPF6450
User's Guide