Canon imagePROGRAF iPF6450 User Manual page 1037

iPF6450
•
Choosing a bottom margin of 3 mm (0.12 in) may distort images by the bottom edge.
In this case, select Paper Source > Manual and specify a bottom margin of 23 mm (0.91 in).
Important
•
Printable area: The area that can be printed.
•
Guaranteed Print Area: We recommend printing within this area.
Note
•
To print so that your original matches the print area exactly, use an oversized paper size that includes the required margin.
(See "Printing on Oversize Paper.")
•
When printing from the Top Paper Feed Slot, you can choose a bottom margin of either 3 mm (0.12 in) or 23 mm (0.91 in).
Specifying Paper Source > Manual in the printer driver leaves a bottom margin of 23 mm (0.91 in). On the other hand, choos-
ing Manual (3mm margins) in Paper Source sets the bottom margin at 3 mm (0.12 in), which provides a larger area for
printing.
However, Manual (3mm margins) is not available with the following paper.
•
Fine Art Photo
•
Fine Art Heavyweight Photo
•
Fine Art Textured
•
Types of paper are subject to change.
For details on types of paper, see the Paper Reference Guide. (See "Types of Paper.")
Rolls
• Printable Area
A margin of 3 mm (0.12 in) on all sides is required. During borderless printing, the margin on all sides is 0 mm. For
information on paper compatible with borderless printing, see the Paper Reference Guide. (See "Types of Paper.")
→P.526
• Recommended Print Area
A margin of 20 mm (0.79 in) on top, 5 mm (0.20 in) on bottom, and 5 mm (0.20 in) on left and right sides is re-
quired.
•
Printable area: The area that can be printed.
•
Guaranteed Print Area: We recommend printing within this area.
Note
•
To print so that your original matches the print area exactly, use an oversized paper size that includes the required margin.
(See "Printing on Oversize Paper.")
User's Guide
→P.86
→P.86
→P.526
Print Area
1037