Canon imagePROGRAF iPF6450 User Manual page 629

iPF6450
•
Depending on the selected standard paper, you might not be able to input the Name in Printer Driver and add the
created custom paper to the printer driver. To use the custom paper in the printer driver, create it by changing the
Note
standard paper to another paper.
•
The characters that can be entered for Name in Printer Driver and Name on Control Panel are stated below.
alphanumeric, space, "-", ".", "_", "()", "+", "%", ",", "/"
•
For Name in Printer Driver up to 32 one Byte characters can be entered, and for Name on Control Panel up to 16
one Byte characters can be entered.
•
Paper Name (English) is used in keeping track of the amount of roll paper left, in status print, etc.
For Paper Name (English) up to 16 one Byte characters can be entered.
6
Load the custom paper in the printer and then click the
OK button.
•
Do not load paper that is curled or that has already been printed on.
Important
7
The Step 3: Paper Source Settings dialog box is dis-
played. Select the paper source where the custom pa-
per is loaded and then click the OK button.
8
The Step 4: Paper feed adjustment dialog box is dis-
played. Click the Execute button to execute paper feed
adjustment.
The adjustment pattern is printed, and the paper feed is
automatically adjusted based on the printing result.
Once the paper feed adjustment is complete, click the
Next button.
•
Check that there is no paper left on the ejection guide.
•
Important If Paper Feed Adjustment is not executed, horizontal stripes with different color tones may appear in the printed
material. Paper feed adjustment does not need to be executed more than once. Execute paper feed adjustment
only once each time you add a custom paper.
User's Guide
Add Custom Paper (Mac OS X)
629