Canon imagePROGRAF iPF6450 User Manual page 659

iPF6450
*1: If a pending job is selected, Print Anyway is displayed.
Set./Adj. Menu
Limited items are displayed during printing. The displayed items are indicated by annotations.
First Level Second Level
Nozzle Check ┋ ColorCheck Print ( *14 )┋ Status Print ┋ Interface Print ┋ Paper Details ┋ Print Job
Test Print
Log ┋ Menu Map
Adjust Printer Head Posi. Adj.
Feed Priority
Adj Far Ed Feed
Calibration
Maintenance Head Cleaning
Nozzle Check
Replace
P.head
Repl. maint cart
Head Info
Clean Platen
Interface Setup EOP Timer ( *8 )
( *8 )
TCP/IP ( *8 )
User's Guide
Third Level Fourth Level
Standard
Simple
Initial adjustmt ┋ Manual ( *1 )
Other
Automatic *┋ Print Quality ┋ Print Length
Adj. Priority
Auto(GenuinePpr) ┋ Auto(OtherPaper) ┋ Manual
Adj. Quality ( *2 )
Adjust Length Adjustment-
( *3 ) Print
Change Set-
tings
AutoAdjst(HiPrc) ( *14 )
Auto Adjust
ColorCheck Print ( *14 )
Pattern Size Standard *┋ Large
( *14 )
Date ┋ Paper Type ┋ Adjustment Type
Calibration Log
Disabled ┋ Enabled *
Use Adj. Value
Set Exec. Off *┋ On
Guide
Return Defaults
Head Cleaning A ┋ Head Cleaning B
Printhead L ┋ Printhead R
ProductName: ┋ s/n: ┋ Days elapsed: ┋ Count [Mdot]:
Printhead L
ProductName: ┋ s/n: ┋ Days elapsed: ┋ Count [Mdot]:
Printhead R
10 sec. ┋ 30 sec. ┋ 1 min. ┋ 2 min. ┋ 5 min. ┋ 10 min. *┋ 30 min. ┋ 60 min.
IPv4 ( *8 ) IPv4 Mode ( *8 )
Protocol ( *4 )
( *8 )
IPv4 Settings
DNS Settings
( *9 )
Fifth Level Sixth Level
A:High ┋ B:Standard/Draft
A:High ┋ B:Standard/Draft
Automatic ┋ Manual *
On ┋ Off *
DHCP ( *8 )
On ┋ Off *
BOOTP ( *8 )
On ┋ Off *
RARP ( *8 )
IP Address ( *9 ) xxx.xxx.xxx.xxx
Subnet Mask xxx.xxx.xxx.xxx
( *9 )
Default G/W ( *9 ) xxx.xxx.xxx.xxx
On ┋ Off *
DNS Dync up-
date ( *9 )
Pri. DNS SrvAddr ( *9 )
Sec. DNS SrvAddr ( *9 )
DNS Host Name ( *9 )
Menu Structure
Seventh Level
659