Printing Interface Setting Reports - Canon imagePROGRAF iPF6450 User Manual

Large format printer
Hide thumbs Also See for imagePROGRAF iPF6450:
Table of Contents

Advertisement

Printing Interface Setting Reports

Printing Interface Setting Reports
Printing Interface Setting Reports
You can print an Interface Print report indicating the current interface settings values of the printer.
Interface Print reports indicate settings values for TCP/IP, NetWare, and other settings.
Printing Interface Print reports
1
Load the paper.
If using sheets, load paper A4/Letter-sized, you will need at least three sheets.
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
Note
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Test Print, and then press the OK button.
5
Press ▲ or ▼ to select Interface Print, and then press the OK button.
Confirming Interface Print information
The following information is included in the Interface Print report.
Canon imagePROGRAF iPFxxxx Interface Print
Firm
Boot
MIT(DBF)
MIT(DB)
S/N
Date
EOP Timer
TCP/IPv4
676
).
If the Tab Selection screen is not displayed, press the Menu button.
Frame Type
Use DHCP
Use BOOTP
Use RARP
Enable DNS Dynamic Update
Use Zeroconf Function
Printer model
Firmware Version
Boot ROM Version
MIT Database Format Version
MIT Database Version
Printer serial number
The date when the interface setup print report was
printed.
Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
IPv4 settings values.
iPF6450
User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents