Cutting Roll Paper After Printing (Mac Os X) - Canon imagePROGRAF iPF6450 User Manual

iPF6450
5
N
Click Roll Paper Options to display the Roll Paper
Options dialog box.
6
To enable automatic cutting, click Yes in the
self, click Print Cut Guideline.
7
Click OK to close the Roll Paper Options dialog box.
8
Confirm the print settings and print as desired.
•
For tips on confirming print settings, see " Confirming Print Settings
Note
Roll paper will be automatically cut after printing.

Cutting Roll Paper After Printing (Mac OS X)

Cutting Roll Paper After Printing (Mac OS X)

This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to
print a cut line for manual cutting.
•
The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps below to
reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
Note
1
B
This sets the Format for and
• The configuration method varies depending on the OS and
application software you are using.
Note
If Page Setup is displayed in the application menu, the set-
tings are configured by opening the Page Attributes dialog
box from Page Setup.
If it is not displayed, the settings are configured in the up-
per part of the printer driver displayed when you select
Print from the application software menu.
User's Guide
A
Automatic Cutting list. If you prefer to cut the paper later your-
C
Paper Size.
Cutting Roll Paper After Printing (Mac OS X)
"
→P.180
171