Canon imagePROGRAF iPF6450 User Manual page 964

Preparing to Transfer the Printer
Important
•
Note
4
Close the Top Cover.
5
If any options are attached to the printer, remove them from the printer and pack them.
6
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
7
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping
box.
964
• Do not touch the Linear Scale (a) or Carriage Shaft (b).
This may stain your hands and damage the printer.
Here, the Belt Stopper is the one that was removed and stored after initial installation.
iPF6450
User's Guide