Specifying The Cutting Method For Rolls - Canon imagePROGRAF iPF6450 User Manual

Specifying the Cutting Method for Rolls

2
Select the Main pane and click
Type.
3
In the Paper Detailed Settings dialog box displayed
next, select the desired settings values in
Pages and
then click OK.
(See "Paper Detailed Settings Dialog Box (Mac OS X).")
→P.372

Specifying the Cutting Method for Rolls

Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Automatic The roll is automatically cut by the Cutter Unit following
printer driver settings.
Eject Select this to move the cutter by key operation and cut
paper. Although there are cases with Automatic in
which the paper falls and the paper surface is scratch-
ed, you can avoid damaging the paper with this method
since you can cut by holding the paper with your hand
so that the paper does not fall when cutting. Also, since
546
you can cut while visually confirming the drying of the
ink, you can avoid ejecting paper before the ink has
dried.
C
Settings in
D B
Between Scans in Drying Time, and
Cutting Method
A
Media
C
Between
Printer Setting
Media Automatic
Menu > Pa-
per Details
Eject
> (Various
Types of
Paper) >
Cutting
Mode
iPF6450
Driver Setting
Auto Cut Yes
(See "Cut-
ting Roll Pa-
Yes
per After
Printing.")
→P.170
User's Guide