*: Codes represent the numbers that are displayed in DISPLAY of the service mode and that are recorded in PRINT INF. As to PRINT INF, the codes record the

last 4 digits. Messages that are not accompanied by a code indication are not logged.

Display message

Cannot cut paper.

Lift the release lever and reload the

paper.

Paper Mismatch.

Papr Size Mismatch

MediaType Mismatch

PaperWidth Mismatch

Mail box nearly full.

Delete unwanted data

Maximum jobs stored.

Delete unwanted data.

The paper is too small.

GL2:W0501

The memory is full.

GL2:W0502

The parameter is out of

range.

GL2:W0504

This command is not

supported.

GL2:W0903

The memory is full.

GL2:W0904

The memory is full.

GARO W1221

GARO W1222

GARO W1223

GARO W1224

GARO W1225

GARO W1226

GARO W1231

GARO W1232

GARO W1233

GARO W1234

GARO W1235

Problem with Printhead.

Chk printing results

Problem with Printhead R

Chk printing results

Problem with Printhead L

Chk printing results

Ink Level: Check

No ink tank loaded.

Check ink tank.

8-2

Code*

Condition detected

00000000-1011

Cannot cut perform force cutting because

paper is too short.

01061000-1021

Paper type mismatch

01063000-1022

Paper size mismatch

01063000-1023

Paper size/type mismatch

01063000-1054

Roll media width mismatch

The occurrence conditions of roll paper

width mismatch have been met with

"Warning" set in [Detect Mismatch] in the

menu settings.

011A1001-2901

The free hard disk space left for Personal

Boxes in the printer's hard disk does not

have more than 1 GB, combined.

011A1006-2907

Saved jobs exceed the Personal Box

capacity.

013200D2-1051

Size clip error

01340501-1040

Memory full (HP-GL/2)

01340502-1041

Invalid parameter (HP-GL/2)

01340504-1043

Invalid command (HP-GL/2)

01340903-1047

Overflow of replot buffer (HP-GL/2)

01340904-1048

Overflow of Polygon buffer (HP-GL/2)

01341221-1030

GARO (image mode) : Unknown

command

01341222-1031

GARO (image mode) : Invalid parameter

count (no parameters)

01341223-1032

GARO (image mode) : Required parameter

missing

01341224-1033

GARO error

01341225-1034

GARO (image mode) : Other warning

01341226-103A

GARO (image mode) : Image processing

table error

01341231-1035

GARO (setup) : Unknown command

01341232-1036

GARO (setup) : Invalid parameter count

01341233-1037

GARO (setup) : Required parameter

missing

01341234-1038

GARO (setup) : Data out of bounds

01341235-1039

GARO (setup) : Other warning

01800500-1010

Number of non-discharging nozzles in

printhead:

Warning level

01800500-1012

Non-discharge occurred in printhead1

01800500-1013

Non-discharge occurred in printhead2

01810101-1001

Y ink tank near-empty

01810101-1411

Y ink tank removal

Action

Reload new paper.

Match the paper type in printer driver and the one

specified in printer panel.

Match the paper size in printer driver and the one

specified in printer panel.

Match the paper type/size in printer driver and the ones

specified in printer panel.

The warning is cleared when the print job is completed

or cancelled.

Delete unneeded jobs stored in Personal Boxes.

Press the stop button to cancel the print job.

Delete print jobs from the queue.

Delete unneeded jobs stored on the hard disk.

Check the media size check.

Change the media size.

Check if there is the non-image area of the print.