Canon imagePROGRAF iPF6450 User Manual page 957

iPF6450
6
Move the Locking Caster switch on the Stand to OFF to un-
lock and move the printer.
•
When moving the Stand, always unlock by moving the Locking Caster switch to OFF. Moving the Stand with the
Locking Caster locked may scratch the floor.
Important
7
Move the Locking Caster switch on the Stand to ON to lock the Stand.
8
If you are using the Spectrophotometer Unit, attach the Spectrophotometer Unit to the printer.
(See "Removing and Attaching the Spectrophotometer Unit.")
9
Connect the power cord to the Power Supply Connector on the
back of the printer.
10
Connect the interface cable to the printer.
11
Plug the power cord into the outlet.
12
Connect the interface cable to the computer or network.
Removing and Attaching the Spectrophotometer Unit
• Removing the Spectrophotometer Unit From the Stand
1
Turn the printer off.
(See "Turning the Printer On and Off.")
User's Guide
→P.957
→P.23
Carrying the Printer
957