Page Setup Sheet - Canon imagePROGRAF iPF6450 User Manual

Page Setup Sheet

Page Setup Sheet

Page Setup Sheet
You can use this sheet to set the size of the image to be printed, the media size, and whether to enlarge/reduce the
image.
• Input Image Size
The size of the image imported to Print Plug-In is displayed.
• Borderless Printing
When you place a checkmark here, the Specify Roll Paper Width dialog box is displayed and you can print an
image without borders.
For more information about Borderless Printing, see "Print with No Borders."
•
Available only if rolls are selected in Paper Source.
Note
• Enlarged/Reduced Printing
When you place a checkmark here, you can print enlarged/reduced images.
When printing an enlarged/reduced image, select the method for enlargement/reduction. The image size sent to
the printer is displayed matching the selected method in Output Image Size.
The following settings are available for enlarged/reduced printing.
Fit Paper Size
Fit Roll Paper Width
Scaling
•
This is not displayed when a checkmark is placed in Borderless Printing.
Note
474
• Output Image Size
The output image size is displayed up to one place after the decimal point in millimeters.
Setting
This automatically enlarges/reduces the entire image imported to Print Plug-In to match the ex-
port media size when printing.
This automatically enlarges/reduces the entire image imported to Print Plug-In to match the width
of the roll paper with the width of the image when printing.
*Displayed only if rolls are selected in Paper Source.
This enlarges/reduces the entire image by the specified scaling value. Input the scaling value in
numerical characters. You can specify a range between 5-600%.
*You can change the numbers by clicking either ▲ or ▼.
→P.508
Details
iPF6450
User's Guide