Canon imagePROGRAF iPF6450 User Manual page 828

Color Calibration Using the Printer Sensor
4
Press ▲ or ▼ to select Calibration, and then press the OK button.
5
Press ▲ or ▼ to select Auto Adjust, and then press the OK button.
After the environment measurements and paper are confirmed, and color calibration is executed, the calibra-
tion adjustment value is set automatically.
Applying Calibration Adjustment Values During Printing
The application of the calibration adjustment values when printing can be set in the printer driver or on the menu of the
Control Panel.
However, when the setting value of the printer driver and the setting value of the Control Panel differ, the setting of the
printer driver is prioritized.
How to Apply
Configure on the printer driver menu. (Windows)
Configure on the printer driver menu. (Mac OS X)
Configure on the menu of the Control Panel.
•
After color calibration, you can use the printer driver to make further color adjustments as necessary.
(See "Adjusting the Color in the Printer Driver.")
Note
Checking Color Calibration Execution Logs
You can confirm information of color calibration such as the execution date and executed paper type by the following
method.
How to Check
Confirm it on the Control Panel of the printer.
Print information about the printer.
Confirm with imagePROGRAF Status Monitor.
(Windows)
Confirm this in the Printer Information dialog
box of the printer driver. (Mac OS X)
Check in the Color Calibration Management
Console.
Specifying Execution Guide
The Execution Guide function displays a guide on the Control Panel, imagePROGRAF Status Monitor (Windows), im-
agePROGRAF Printmonitor (Macintosh), RemoteUI, and/or the Color Calibration Management Console.
If you enable this function, an Execution Guide is displayed in the following cases.
• When a new Printhead has been installed
828
When a certain amount of printing has been executed after color calibration is executed
•
• When the data of color calibration has been initialized
To enable the function, set Set Exec. Guide to On on the menu of the Control Panel.
Configure Calibration Value.
(See "Paper Detailed Settings Dialog Box (Windows).")
Configure Calibration Value.
(See "Paper Detailed Settings Dialog Box (Mac OS X).")
From Set./Adj. Menu, select Adjust Printer > Calibration > Use Adj. Value.
(See "Menu Settings.")
→P.663
→P.56
From Set./Adj. Menu, select Adjust Printer > Calibration > Calibration Log.
(See "Menu Settings.")
→P.663
From Set./Adj. Menu, select Test Print > Status Print.
(See "Status Print.")
→P.673
On the Information sheet of imagePROGRAF Status Monitor, click the View Calibration Log
button.
(See "The Features of imagePROGRAF Status Monitor.")
In the Printer Information dialog box, click the Information tab, and click the View Calibra-
tion Log button.
(See "Main Pane (Mac OS X).")
Check in the Calibration sheet.
(See "Checking the Color Calibration Status (Windows).")
(See "Checking the Color Calibration Status (Mac OS X).")
How to Operate
→P.189
→P.372
How to Operate
→P.732
→P.368
→P.861
→P.897
iPF6450
User's Guide