Error Codes - Oce ColorWave 600 User Manual

Error codes

When to do
Note: Error-codes are only displayed at the 'Printer operator panel'.
Before or during the calibration, it is possible that the calibration failed. In that case,
you will be informed immediately through an error code on the 'Printer operator
panel'.
Overview error codes
[119]
Error-code
22917
22918
22919
22920
22921
22922
22923
22924
22925
Action
Calibration not accepted:
Calibration not accepted:
Calibration not accepted:
Calibration not accepted:
Calibration not accepted:
Calibration not accepted:
Calibration not accepted:
Calibration failed:
Calibration failed:
Error codes
Remarks
Roll not loaded
Roll too small
Media type not suitable for
installation calibrations
Media type not suitable for
Y-alignment
Media type not suitable for
paper step calibration
External output not available
for delivery
Printer engine status is not
standby or the folder (if
configured) is offline or turned
off
Out of toner during calibrations
Out of media during
calibrations
277