Introduction
The installation procedure
Introduction
To install the printer and integrate the Océ ColorWave
network you must follow four main steps.
Run the installation wizard from the printer operator panel.
■
If you connect the network cable of your company network and you switch on
your Océ ColorWave
automatically.
Complete the printer configuration in the Océ Express WebTools (from a
■
workstation).
Configure the regional settings of the Océ ColorWave
■
Print the Customer Acceptance Test (CAT) demo print.
■
48
Chapter 3 Prepare the printing system for use and get started
™
600 for the first time, an installation wizard starts
™
600 system in your company
™
600.