Configure The Regional Settings Of The Océ Colorwave™ 600 - Oce ColorWave 600 User Manual

Configure the regional settings of the Océ ColorWave™ 600
Configure the regional settings of the Océ ColorWave™ 600
Purpose
The regional settings are configured during the installation of your Océ ColorWave™
600. If you want to change the initial configuration, you can do so in the 'Regional set-
tings'.
Define the following settings for the printer.
'First language' and 'Second language' of the printer operator panel
'Measurement unit'
'Date format'
'Time format'
'Current date and time'
Note:
Every time you change the 'Measurement unit', the controller recalculates the values
from millimeter to inches and vice versa. If you reverse to the original value of this setting
a slight calculation difference can occur due to rounding differences.
How to define the regional settings
Select 'Preferences' - 'System defaults' - 'Regional settings'.
1.
Click a single value, for example the value selected for 'First language',
2.
or
Click 'Edit' in the 'Regional settings' bar to access a window for all regional settings.
3.
Modify the settings. You can choose between:
4.
settings that are commonly used in the USA
or settings that are commonly used in the rest of the world.
Click 'Ok' to:
5.
confirm you entries
or 'Cancel' to reject your entries.
76 Chapter 3 - Prepare the printing system for use and get started