Installation Procedure; Removal & Installation Of Rear Doors; Preparations; Precautions - Chery S18D Service Manual

Chery S18D Service Manual
3.18. Remove the two fixing screws with 10#
socket wrench, remove the door outside
handle.
3.19. Remove the three screws fixing the lock
cylinder with cross screwdriver, remove
the lock cylinder.
3.20. Remove the two screws that fix the lock
cylinder with cross screwdriver, remove
the lock cylinder.
3.21. Use 13# socket wrench to remove the
four fixing screws of the hinge that fix the
vehicle door, remove the door.
Torque: 32±3 N.m

4. Installation Procedure

The installation procedures are reverse to those for removal.
Note: The removal procedures for the right-front door can refer to those for the left-front door.
II. Removal & Installation of Rear Doors

1. Preparations

Tools: slotted screwdriver, cross screwdriver, socket wrench and etc.

2. Precautions

2.1. Wear necessary appliance for labor protection to prevent from accidents.
2.2. Disconnect the battery to prevent damage for electrical equipments.
21