Checking Gps Connections; Changing The Gps Time - Standard Horizon MATRIX GX3000S Owner's Manual

8.4 CHECKING GPS CONNECTIONS

After connections have been made between the GX3000S and the GPS, a
small satellite icon will appear on the top right corner of
the LCD display. To see the additional GPS information,
press and hold the [ H/L ( NAV )] key. The GX3000S shows
the Date, Time, SOG and COG.

8.5 CHANGING THE GPS TIME

From the Factory the GX3000S shows GPS satellite time or UTC time. A time
offset is needed to show the local time in your area.
1. Press and hold down the [ CALL ( MENU )] key until
"
Radio Setup Radio Setup Radio Setup
Radio Setup Radio Setup
2. Press the [ ENT ] key, then select "
CHANNEL selector knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If "
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
5. Press the [ ENT ] key to store the time offset.
6. Press the [ 16/9 ] key or turn the CHANNEL selector knob to select "
then press the [ ENT ] key to return to the "
and press the [ ENT ] key to return to radio operation.
Page 12
" menu appears.
0:00 0:00 0:00 " is assigned, the time is
0:00 0:00
O
FFSET
Time Set Time Set " with the
Time Set Time Set Time Set
Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
T T
IME ABLE
Exit Exit Exit
Exit Exit
" menu, select " Exit Exit
Exit Exit Exit
GX3000S
,"
"