Checking Gps Connections; Changing The Gps Time - Standard Horizon MATRIX GX2000 Owner's Manual

8.5

CHECKING GPS CONNECTIONS

After connections have been made between the
GX2000/GX2100 and the GPS, a small satellite icon
will appear on the top right corner of the LCD displayand
displays your current location (Latitude/Longitude) on
the display.
If there is a problem with the NMEA input from a GPS, the GPS icon will
blink continuously until the connection is corrected.
8.6

CHANGING THE GPS TIME

From the Factory the GX2000/GX2100 shows GPS satellite time or UTC
time when a optional GPS is connected. A time offset is needed to show the
local time in your area.
1. Press and hold down the [ CALL ( MENU )] key until
"SETUP MENU SETUP MENU" appears, then select "GENERAL
SETUP MENU SETUP MENU
SETUP MENU
SETUP" with the CH knob.
SETUP SETUP
SETUP SETUP
2. Press the CH knob, then select "TIME OFFSET
the CH knob.
3. Press the CH knob, then turn the CH knob to select
time offset from UTC. See illustration below to find
your offset time from UTC. If "00:00
the time is the same as UTC (Universal Time Coor-
dinated or GMT Greenwich Mean Time).
4. Press the CH knob to store the time offset.
5. Press the [ CLR ( WX )] key several times to return to
radio operation.
Page 16
NOTE
GENERAL GENERAL
GENERAL GENERAL
TIME OFFSET" with
TIME OFFSET TIME OFFSET
TIME OFFSET
00:00" is assigned,
00:00 00:00 00:00
O T T
FFSET IME ABLE
GX2000/GX2100