Checking Gps Connections; Changing The Gps Time - Standard Horizon Matrix GX2000 Owner's Manual

8.5

CHECKING GPS CONNECTIONS

After connections have been made between the
GX2000/GX2100 and the GPS, a small satellite icon
will appear on the top right corner of the display and
displays your current location (Latitude/Longitude) is
shown on the display.
If there is a problem with the NMEA input from a GPS, the GPS icon will
blink continuously until the connection is corrected.
8.6

CHANGING THE GPS TIME

From the Factory the GX2000/GX2100 shows GPS satellite time or UTC time
when an optional GPS is connected. A time offset is needed to show the local
time in your area. The Time Offset must be changed in order for the radio to
display the current time in your area. Please see the Offset Time Table at the
bottom of this page.
1. Press and hold down the [ CALL ( MENU )] key
until "Setup Menu Setup Menu" appears, then select "GEN-
Setup Menu Setup Menu
Setup Menu
ERAL SETUP" with the CHANNEL knob.
ERAL SETUP ERAL SETUP ERAL SETUP ERAL SETUP
2. Press the [ SELECT ] soft key, then select
"TIME OFFSET TIME OFFSET" with the CHANNEL knob.
TIME OFFSET TIME OFFSET
TIME OFFSET
3. Press the [ SELECT ] soft key, then rotate the CHAN-
NEL knob to select time offset from UTC. See illus-
tration below to find your offset time from UTC. If
"00:00 00:00" is assigned, the time is the same as UTC
00:00 00:00
00:00
(Universal Time Coordinated or GMT Greenwich Mean Time).
4. Press the [ ENT ] soft key to store the time offset.
5. Press the [ QUIT ] key several times to return to radio operation.
GX2000/GX2100
NOTE
GEN- GEN-
GEN- GEN-
O T T
FFSET IME ABLE
Page 23