Advanced Energy
Figure 4‑17. DC connections
CONNECTING TO THE PV ARRAYS
DANGER:
Risk of electrical shock. When exposed to light, PV arrays create electrical
energy that could cause a hazardous condition.
DANGER:
Risque d'électrocution. Lorsqu'elles sont exposées à la lumière, les piles
photovoltaïques génèrent un courant électrique susceptible de causer des
conditions dangereuses.
Follow these steps to wire the DC inputs from the PV panels to the inverter. These
instructions are for a negatively grounded array. For a positively grounded array, use
the opposite terminals.
Tools Required
• 5/32" Allen wrenches (Allen wrench adaptor for a socket wrench
recommended)
• Open-end wrench or socket wrench
• Torque wrench
• Voltmeter
4‑22
Ground bus bar
DC- bus bar
Installing
DC+ bus bar
570-1001791-05A