To Replace the Battery
Use the following instructions to access the battery.
1. Shutdown the inverter and wait five minutes before starting.
2. Remove the communications PCB from the card cage in the data monitoring
compartment.
3. Remove the battery located in the lower right section of the PCB by pushing
the battery up from the lower right corner of the battery.
4. Insert a new battery with the positive side facing out.
5. Reinsert the communications PCB in the card cage.
6. Close and secure the door on the data monitoring compartment.
570-1001791-05A
Advanced Energy® AE 500 Inverter
Maintenance
7‑7