• Initialize: The initialize state is displayed on the screen when the inverter is first
turned on.
• Energy tracking: These are the normal power production states of idle, run, and
AC and DC precharge. Following the startup delay, the inverter goes to energy
tracking which starts with the DC and AC precharge and then goes to idle and
run.
• Fault
• Warning
• Disabled
The display screens for each state are shown in the following figures. When there is a
series of display screens associated with the inverter state then the inverter will
continuously scroll through these screens.
PVP 500KW
STARTUP DELAY
Starting In
234 seconds
Figure 5‑3. Initialize state screen
Advanced Energy
Industries, Inc.
PVP 500KW
www.aei.com
Screen 1: Product
AC
Volts
Amps
Screen 4: AC values
Figure 5‑4. Energy tracking state screens
☞
Important
The DC current display is not a precise measurement.
Fault Codes
SYS 0020
VLT 0000
GRD 0000
Screen 1: Fault code(s)
Figure 5‑5. Fault state screens
570-1001791-05A
POWER TRACKING
Screen 2: Power tracking
P
L1
L2
L3
Q
278
281
279
-Q
185
181
183
S
Screen 5: Power controls
Fault
DRV 0000
AC FAST UNDERVOLT A
TMP 0000
GFDI FAULT
Screen 2: Fault text
Advanced Energy® AE 500 Inverter
Screen 3: DC values
84.4 MWh
0.1 MVArh
4.8 MVARh
78.4 MVAh
Screen 6: Power values
Screen 3: Contact information
Operation
DC
Volts
352
Amps 267
Power Out
352 kW
Total
56.2 MWH
Advanced Energy
phone: (877)312-3832
email:
invertersupport@
aei.com
5‑5