Advanced Energy
☞
Important
Do not lift the inverter from the upper bolt points.
Handling Options
The AE 500 inverter may also be moved using lifting bars inserted through the front
to back fork slot openings.
☞
Important
Use only the front and rear fork slots. Do not use side slots to move the
inverter.
STORAGE
Prior to installation, the inverter should be stored in a non-condensing environment to
avoid potential rust and corrosion. Remove the transport bag when the inverter is
received. If the hood scoops are not installed, both hood scoops will need to be
installed immediately.
LOCATION AND CLEARANCES
Location
Select a suitable location to install the inverter. The inverter must be installed on a
flat, solid surface such as a concrete pad.
Noise
The inverter is capable of emitting audible switching noise and should be located
away from noise sensitive areas that are populated by people or animals.
Recommended Clearances
Working clearances must comply with your national and local electrical code.
Table 3‑1. Inverter clearances
Location
Distance
Front
36"
3‑2
The front clearance is required to open and maintain the unit or as
required by local code.
Planning
Description
570-1001791-05A