Figure 4-13. Dc Side Entry Gland Plates; Figure 4-14. Installation Of Conduit Hub - Advanced Energy AE 600 User Manual

Advanced Energy
Figure 4‑13. DC side entry gland plates
2. Remove the gland plate while taking care not to damage the weatherproof
gasket material on the back side of the plate.
3. Punch holes as needed in the gland plate.
4. Attach watertight NEMA 4 conduit hubs in each hole.
The inverter is a NEMA 4 enclosure. Use only rain-tight or wet-location
conduit hubs and install these hubs as shown in the following figure.
Figure 4‑14. Installation of conduit hub
4‑14
Service access only
Side entry gland plates
Lower cabinet gland plate
2 inch straight metal conduit connector
4348
CAUTION:
For outdoor installations make liquid-tight connections to the unit.
ATTENTION:
Pour les installations extérieures, effectuer des connexions étanches
à l'unité.
Installing
Cover for fan compartment
570-1001791-05A