Table of Contents
Advertisement
Planning
GENERAL REQUIREMENTS FOR PLANNING
AND INSTALLATION
Planning for an installation of an AE inverter should only be performed by qualified
engineers with a thorough understanding of the processes involved for a successful
installation. Licensed and trained installers must comply with all local and national
code requirements for the installation of electrical power systems with AC and DC
voltages to 600 V.
The inverter must be anchored to a concrete mounting pad. The mounting pad must
meet local seismic requirements. Refer to the mechanical drawings in this manual for
optional seismic-rated concrete pad mounting requirements.
HANDLING THE INVERTER
WARNING:
Heavy equipment. AE 500 units weigh up to 4,140 kgs (9,100 lbs) with pallet
and packaging. If the unit is lifted incorrectly, it may result in death. In
addition, improper handling may result in serious damage to the unit and may
also void the warranty. Keep all doors securely closed while moving the unit.
Only use lifting equipment that is rated for the weight of the unit. Only use the
specified lifting points.
AVERTISSEMENT:
Équipement lourd. Les unités AE 500 pèsent jusqu'à 4,140 kgs (9,100 lbs)
avec palettes et emballage. Tout levage inadéquat de l'unité peut provoquer
la mort. De plus, toute manipulation inadéquate peut provoquer des
dommages graves à l'unité et pourrait aussi annuler la garantie. Garder
toutes les portes bien fermées lors du déplacement de l'unité. Utiliser
uniquement un équipement de levage d'une capacité nominale convenant au
poids de cette unité. Utiliser uniquement les points de levage spécifiés.
The inverter can weigh up to 4,140 kgs (9,100 lbs) with their pallet and packaging. If
the inverter is improperly handled, serious damage can occur and the warranty may
be voided. Only use lifting equipment that is rated for the weight of the inverter. Only
use the specified lifting points. Leave the inverter on its shipping pallet with the
protective plastic wrap in place until it is time to install.
570-1001791-05A
Advanced Energy® AE 500 Inverter
Planning
Chapter
3
3‑1
Advertisement
Table of Contents
Troubleshooting
