Advanced Energy
VISUAL INSPECTION
DANGER:
Risk of electrical shock. High voltages are present in the inverter cabinet.
Both AC and DC disconnects must be in the OFF position when working on
the unit. Wait five minutes to discharge high voltage before opening the front
panels of the inverter.
DANGER:
Risque d'électrocution. L'intérieur de l'onduleur est soumis à des hautes
tensions. Les interrupteurs de courant alternatif et continu doivent être mis
HORS TENSION durant les travaux sur l'unité. Attendez cinq minutes afin de
permettre la décharge du courant haute tension avant de démonter les
panneaux avant de l'onduleur.
DANGER:
RISK OF DEATH OR BODILY INJURY. Disconnect and lockout/tagout all
sources of input power before working on this unit or anything connected to
it.
DANGER:
RISQUE DE MORT OU DE BLESSURES CORPORELLES. Débrancher et
verrouiller/étiqueter toutes les sources de puissance d'entrée avant de
travailler sur cette unité ou sur tout élément qui y est raccordé.
AE recommends visually inspecting the inverter every time it is serviced. Start by
observing the front, back, and sides of the inverter for damage, foreign objects, or
dust and debris that may have accumulated around the inverter. Remove dirt and
debris from the area around the inverter at least every six months.
MAINTENANCE SCHEDULE
The following maintenance should be performed annually by a qualified service
person. Please refer to AE's Terms and Conditions of Sale for warranty-related items.
Complete the maintenance checklist below save the information for your records.
7‑2
Maintenance
570-1001791-05A