Alerting Esmprotm; Dialog Boxes; Select A Server Dialog Box; Server Properties Dialog Box - NEC Express5800 120Ld User Manual

Alerting ESMPRO
If MWA receives an alert message from a server, it sends this message to
ESMPRO™ AlertManager. Alert types from MWA to ESMPRO are as follows.
Alerts from the server RomPilot
!
Alert from the server System Management Controller (SMC)
!
* Not supported by some server models.

Dialog Boxes

Select a Server Dialog Box

The Select a server dialog box displays a list of SG-registered servers on MWA.

Server Properties Dialog Box

From the Server Properties dialog box you can view and set properties for the
current server. The contents of the server properties are as follows:
ID page — provides server identification information, such as a server
!
name, an IP address, a MAC address, and a UUID.
Alert page — Sets MWA operation for each type of alert which comes
!
from a server.
[Sound] is checked — MWA beeps when an alert is received from a
!
server. The server window of the server becomes active.
TM
System Reset
*POST stalled (Reset by POST stalled)
*SMI stalled (Reset by SMI stalled)
*Boot failed (Reset by boot failed)
POST end (Booting)
POST error
Security breach attempted
Sensor limit alarm
CPU missing
POST stalled
SMI handler alarm
SMI handler stall
Management Workstation Application B-15