How To Open The Extra 2.5-Inch Hdd Cage Door - NEC Express5800/T110g-S User Manual
Express server express5800 series
Hide thumbs
Also See for Express5800/T110g-S:
- System configuration manual (35 pages) ,
- Configuration manual (34 pages) ,
- Getting started (2 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
8.
Open the front door of the standard 2.5-inch HDD
cage. Slide the tab on the bezel of the extra
2.5-inch HDD cage in the direction shown by the
arrow, and then remove it from the bezel. Sliding
this tab toward the outside of the bezel enables you
to lock the bezel of the extra 2.5-inch HDD cage
when the front door of the standard 2.5-inch HDD
cage is closed.
1.12.5
How to open the extra 2.5-inch HDD cage door
Open the extra 2.5-inch HDD cage in the server by using the following procedure.
1.
Unlock and open the door of the 2.5-inch
hard disk drive bay.
2.
Lay down the server horizontally, and then insert your finger into the opening located on the right side
of the extra 2.5-inch HDD cage door and push the door to the right (see (1) below) to unlock the door.
Pull the door toward the front (see (2) below) to open.
84
Note
You need to open the 2.5-inch HDD bay door first to open the extra 2.5-inch HDD
cage door.
(1)
Express5800/T110g-S User's Guide
1. Installing Internal Optional Devices
(2)
Advertisement
Table of Contents
