CONNECTIONANDPREPARATION
Connectingtheloudspeakers
1 Insert the wires of the loudspeaker cable into
the terminals »RIGHT+/–« and »LEFT+/–«.
– Connect the cables marked in red to the red
terminals.
Connectingexternaldevices
Note:
Switch the hi-fi system off before you connect
7
external devices.
1 Use standard audio adapter to connect the
audio outputs of the external device to the
»AUXIn« socket on the back of the hi-fi sys-
tem.
8
ENGLISH
Connectingtheheadphones
UMS 2010
SOURCE
PRESET
1 Insert the headphone plug (ø 3.5 mm) into
the »
U
« socket on the front side of the hi-fi
system.
– T he loudspeakers of the hi-fi system are
switched off.
Note:
Excessive sound pressure from the ear-
7
phones or headphones can cause hearing
loss.
Connectingtothemainssupply
Notes:
Check that the mains voltage on the type
7
plate (on the back of the hi-fi system) cor-
responds to your local mains supply. If this is
not the case, contact your specialist dealer.
Before connecting the AC power cord to the
7
wall socket, ensure that all other connec-
tions have been made.
1 Plug the power cord into the wall socket.
Caution:
The hi-fi system is connected to the mains
7
with the power cord. Pull out the power plug
if you want to completely disconnect the hi-fi
system from the mains.
Make sure the power plug is easily acces-
7
sible during operation and not hindered by
other objects.
---------------------------------------
UBS
VOLUME
OPEN