Setting Up The Hi-Fi System; Wall Mounting - Grundig Ovation 2i CDS 9000 WEB User Manual

1
6
SET-UP AND SAFETY
Setting up the hi-fi system
The hi-fi system is delivered with a stand. This makes the hi-fi system
easy to place on tables, chests or shelves. If you want to put it some-
where else you can remove the stand.
The hi-fi system can be mounted on a raised stand (approx. 80 cm
high) which is not included in delivery. Ask your specialist dealer
about the stand.

Wall mounting

2
B
A
A wall bracket is part of delivery, and can be used to fix the hi-fi
system to the wall.
Please ensure that a mains socket is present at the installation
location.
1
Release the four screws (A) in the bracket (on the back of the
hi-fi system) and remove the hi-fi system's stand.
2 Screw the device part (B) of the wall bracket with the four
supplied round head screws (C) exactly (see four threaded holes)
to the back of the hi-fi system. All four screws must be used.
3 Screw the wall part (D) of the wall bracket firmly into the wall
plugs into the drill holes using the four screws supplied. Make
absolutely sure the wall is in a suitable condition. The screws and
wall plugs supplied are suitable for using in stone and concrete
walls. Use suitable screws and wall plugs for any other types of
wall.
4 Insert the hi-fi system with the hooks of the device part (B) of the
wall bracket into the openings of the wall part (D) of the wall
bracket and allow to latch in place.
C
4
------------------------------------------------------------
3
D