Wall Mounting - Grundig CDS 7000 DEC Manual

CDS_7000_ DEC_en 21.05.2007 14:49 Uhr
CONNECTION AND PREPARATION
Setting up the hi-fi system
The hi-fi system is delivered with a stand. This makes the hi-fi system
easy to place on tables, chests or shelves. If you want to put it some-
where else you can remove the stand.
The hi-fi system can be mounted on a raised stand (approx. 80 cm
high) which is not included in delivery. You can order this raised
stand.

Wall mounting

A wall bracket is part of delivery, and can be used to fix the hi-fi
system to the wall.
ON/OFF
FUNCTION
VOLUME
USB
ON/OFF
FUNCTION
VOLUME
USB
To remove the stand from the hi-fi system, release the four
1
screws in the bracket on the back of the system.
2 Unscrew the four round head screws at the back of the hi-fi
system.
3 Attach the holder of the wall bracket to the hi-fi system by
screwing the four round head screws into the four threaded
holes on the back of the system.
4 To fasten the bracket to the wall, use the four screws supplied to
screw it tightly into four wall plugs in the wall.
5 To fix the hi-fi system to the wall, place the hooks on the holder
of the bracket into the holes in the wall part of the bracket and
let them latch into place.
Seite 15
_
15