Setting­network - Grundig CMS 5000 User Manual

GENERAL­DEVICE­FUNCTIONS
After this, the following options are available, to
define if the time to be synchronized from radios:
Update from DAB, Update from FM, Update from
Network or No update If you choose
from­ Network" you must indicate your time
zone in the next window. Next choose "ON" for
summer time, otherwise select "OFF".
update", you will have to
If you choose "No­
enter the date and time manually. "AM"/ "PM"
displays only if you have chosen the 12-hour time
format. Select "AM" for the morning hours or
"PM" for the afternoon hours.
Setting­network
For Wi-Fi connection, please make sure that the
router is switched on via the network. If you want
to control the device in all operating modes via
the app, select "YES". If choosing "NO", it is not
possible to control the device from the app in the
(Standby, AUX IN, FM, DAB) operating modes.
Note that the power consumption in standby
mode will be higher when the network connec-
tion is kept up.
Any WLAN networks found are listed on the dis-
play, along with their names. After selecting the
network, you will be asked for input a standard
encryption. To enter the network's key, use the
reel or direction keys on the remote control to
move the cursor through the characters and press
»OK/SCAN« to confirm.
[WPS] There will be hints for the type of network
–if your network device supports WPS function.
Use­one­of­the­following­
methods­of­connection:­
Push button: The device prompts you to press
7
the connect button on the router. Press »OK«on
the device and wait until it appears connected
on the display.
Select the option »PIN« on the device and
7
it will generate 8-digit code number. Enter
the PIN number into the router, access point,
or similar net-work device and wait until it
appears connected on the display.
Skip WPS: Enter key as for a standard encrypt-
7
ed network. For more information on setting
up a WPS encrypted network, see your WPS
router's instructions.
Device attempts to connect to the selected net-
work.
"Update­ It will show connected if the setup is successful.
If connecting fails, it returns to a previous screen
to try again. Once it has completed, press
SCAN« to quit the setup wizard.
­ - ---------------------------------------------------------
ENGLISH
»OK/
11­ ­