Timer; Sleep Timer - Grundig M 2200 Manual

Table of Contents

Advertisement

TIMER­MODE
Your hi-fi system has two timer modes:
– T he timer, which switches the hi-fi system on
at a preset time and wakes you with the input
source you selected.
– T he sleep timer, which switches the hi-fi sys-
tem off at a preset time.
Notes:
You can only set the timer mode with the but-
7
tons on the remote control.
The time has to be set on the hi-fi system.
7
When this setting is being made, if no button
7
is pushed for more than 10 seconds, the hi-
fi system will end the process automatically.
You then have to start again.

Timer

Setting­the­timer
1 Press »
« from the switched off state.
– D isplay: »TIMER SET« appears, followed
by the last input source selected.
2 Select the input source (TUNER, DAB, DISC
or USB) by pressing »
with »
«.
– D isplay: the hours of the switch-off time flash.
Note:
If you selected the signal source DISC or
7
USB and the file is damaged or there is no
CD in the CD compartment, the hi-fi auto-
matically switches to TUNER mode.
3 Enter the hours of the switch-on time with »
or »
« and confirm with »
6
Enter the minutes of the switch-on time with
»
« or »
« and confirm with »
5
6
– D isplay: »VOL«.
4 Set the volume with »
with »
«.
– D isplay: the current time and »
– T he timer is activated
­--------------------------------------------------------------------------------------------------------------------------
« or »
« and confirm
5
6
5
«.
«.
« or »
« and confirm
5
6
«.
Activating­and­deactivating­the­
alarm
1 Deactivate the alarm by pressing »
briefly.
– D isplay: »
deactivated.
Sleep­timer
Setting­the­sleep­timer
1 Switch on the hi-fi system from standby by
pressing »
8
«.
2 Open the function with »SLEEP« on the remote
control.
– Display: »SLEEP−−OFF«.
3 Select the switch-off time (»10«, »20« to »90«,
»OFF«) with »SLEEP«.
– D isplay: e.g. »SLEEP−−30«, is displayed
briefly, then the selected input source and
z
»z
«.
– T he hi-fi system switches off after the selected
time has elapsed.
Ending­the­sleep­timer­prematurely
1 To end the sleep timer prematurely, press
»SLEEP« repeatedly until »SLEEP−−OFF«
appears in the display and »z
or
switch the hi-fi system to standby mode by
pressing »
8
«.
«
« disappears when the timer is
z
« disappears;
ENGLISH
« once
23­

Advertisement

Table of Contents
loading

Table of Contents