Repair and Replacement Procedures
Information in This Chapter
Information in This Chapter
This chapter contains procedures for removing and replacing the major assemblies of your Agilent
Technologies PNA series microwave network analyzer.
Chapter Seven at-a-Glance
Section Title
Before Starting the Removal and
Replacement Procedures
Table of
Removal and Replacement
Procedures
Removal and Replacement Procedures
Post-Repair Procedures
7-2
Summary of Content
Warnings and cautions pertaining to personal safety
and ESD protection.
The proper assembly replacement sequence for your
analyzer.
A table of removal and replacement procedures and the
corresponding page number where they are located.
The actual procedures for removing and replacing the
major assemblies in your analyzer.
The procedures occur in assembly reference designator
numerical order.
A table for the proper tests, verifications, and
adjustments to perform on your analyzer after repair.
PNA Series Microwave Network Analyzers
E8362C, E8363C, E8364C
Start Page
Page 7-3
Page 7-4
See
on page 7-4
for specific
procedures.
Page 7-82
Service Guide E8364-90038
Table 7-1